THROUGH TRANSMISSION LASER WELDING PROCESS OPTIMIZATION FOR SEMICRYSTALLINE AND AMORPHOUS PLASTICS

  • 1Technical University of Liberec, The Institute for Nanomaterials, Advanced Technologies and Innovation, Liberec, CZ
  • 2Technical University of Liberec, Faculty of Mechanical Engineering, Liberec, CZ
  • 3Technical University of Liberec, Faculty of Mechanical Engineering, Liberec, CZ

Abstract

The paper is focused on the research in welding of plastic materials PP, PA 6.6 a ABS. This study deals with the optimization of individual parameters of the transmission laser welding process. The welds’ quality evaluation was based on the testing of thermal and mechanical properties. The plastic materials were modified using the colouring pigments, nucleation agents and glass fibres.

Recommended articles

TUNING PERCEPTION AND MOTION PLANNING PARAMETERS FOR MOVEIT! FRAMEWORK

Ales Vysocky, Robert Pastor, Erik Prada, Zdenko Bobovsky, Vyomkesh Kumar Jha, Stefan Grushko, Lubica Mikova
Keywords: Motion planning | perception | MoveIt | benchmark testing | manipulators | tuning | optimization