NUMERICAL ANALYSIS OF THE FLOW CONDITIONS IN THE AIR DISTRIBUTION ELEMENT

  • 1Department of Power Engineering, Faculty of Mechanical Engineering, Technical University of Kosice, Kosice, SK
  • 2Department of Thermal Engineering, Faculty of Materials Science and Technology, VSB Technical University of Ostrava, Ostrava, CZ

Abstract

The article presents the results of a numerical analysis of the flow conditions in the air distribution element in a combined refrigerator and freezer. A numerical analysis was carried out using the boundary conditions identified through an experiment. The article includes an analysis of the impact of the mesh type and the used turbulence models on the profile of the air flow velocity in the outlet openings of the used distribution element. The required ratio of the volumetric flow rates of the air absorbed by the fan, for the smaller to the larger outlet openings, should be 1:2.2. This air distribution ratio was monitored using three turbulence models: the SST model, the k- model and the RNG model, and two types of elements: tetrahedron and hexahedron, or combinations thereof. The obtained results were used as the basis for a modification of the geometry of the distribution element itself, and a concurrent modification of the size of the gap between the impeller and the internal space of the device.

Recommended articles

MODELING OF THE HEAT DISSIPATION PROCESS OF COMPOSITE MATERIALS DURING STABILIZATION OF THE STRUCTURE USING THE EXAMPLE OF NON-AUTOCLAVED FOAM CONCRETE

Kseniia L. Domnina, Maxim O. Bakanov, Maros Soldan, Sergey V. Fedosov
Keywords: cellular composite | foam concrete | heat release | hydration | heat and mass transfer