STOCHASTIC STRENGTH ANALYSIS OF COMPRESSION HEADLESS SCREW

  • 1VSB - Technical University of Ostrava, Faculty of Mechanical Engineering, Department of Applied Mechanics, , Ostrava, CZ
  • 2University Hospital Ostrava, Ostrava, CZ

Abstract

This article deals with strength and stiffness analysis of headless screw. This issue was solved in cooperation with engineering industry and doctors. The problem was solved using a stochastic approach, which utilizes the field of random events (simulations), which are applied for determination of input values. The prototype of headless (Herbert) screw Ti4.0/1.4x30/75 was used for solving this problem. Mathematical equations for analytical calculation of the maximal equivalent stress in screw were established. This issue is statically indeterminate problem in compressive and tensile stresses and needs one more equation (i.e. the condition of deformation), which describes relationship between extension of screw and contraction of bone. Resulting values are not defined for one specific model, but the simulation is taking into account a large amount of random samples (specifically 5×106 random simulations), which are distributed by bounded histograms. Furthermore, the probabilistic functions of simulated screw were determined. Due to stochastic strength analysis of headless screw, it meets reliability conditions for practical application in osteosynthetic treatment, see [Frydrysek 2016]

Recommended articles

DESIGN OF TEST RIGS FOR MEASURING DYNAMIC PROPERTIES OF SOFT ACTUATORS

Alexander Hosovsky, Monika Trojanova
Keywords: Soft Actuators | Fluid Muscle | Dielectric Elastomer Actuator (DE) | Ionic Polymer Metal Composites Actuator (IPMC) | Nonlinear Dynamic Characteristic

EXPERIMENTAL SETUP FOR ANALYZING FUNDAMENTALS OF CUTTING PROCESSES USING A MODULAR SYSTEM

Jonas Baumann, Jim A. Bergmann, Florian Wöste, Petra Wiederkehr, Rafael Garcia Carballo
Keywords: orthogonal cutting | oblique cutting | process dynamics | cutting fundamentals | modular experimental setup