ACCURACY OF MACHINE TOOLS

  • 1VSB - Technical University of Ostrava, Faculty of Mechanical Engineering, Department of machining, assembly and engineering metrology, Ostrava, CZ

Abstract

The accuracy of milling centre geometry is a basic condition for successful application in practice. Users of modern centres have to deal with the issue of measuring accuracy using in the production program. The desired results are achieved by careful preparation both before and during adjustment operations. These rules apply to all applications for new machines, but also to machines after collision or after handling older machines. The geometrical accuracy of the machine begins at the design stage, when the emphasis must be placed on the precision of production of parts and groups with the precise assembly of new machines. Even the best adjustment or alignment of the machine is not valid if the company orders a poor quality machine that does not meet the required characteristics both in design and quality. Such a poorly selected machine guarantees frequent interventions by technicians to ensure at least the minimum required tolerance.

Recommended articles

DESIGN OF TEST RIGS FOR MEASURING DYNAMIC PROPERTIES OF SOFT ACTUATORS

Alexander Hosovsky, Monika Trojanova
Keywords: Soft Actuators | Fluid Muscle | Dielectric Elastomer Actuator (DE) | Ionic Polymer Metal Composites Actuator (IPMC) | Nonlinear Dynamic Characteristic

EXPERIMENTAL SETUP FOR ANALYZING FUNDAMENTALS OF CUTTING PROCESSES USING A MODULAR SYSTEM

Jim A. Bergmann, Florian Wöste, Petra Wiederkehr, Jonas Baumann, Rafael Garcia Carballo
Keywords: orthogonal cutting | oblique cutting | process dynamics | cutting fundamentals | modular experimental setup