EXPERIMENTAL RESEARCHES OF THE PULSE GAS BARRIER FACE SEAL

  • 1Sumy State University, Department of Computer Science, Faculty of Electronics and Information Technologies, Sumy, UA
  • 2Technical University of Kosice, Department of Automotive and Manufacturing Technologies, Faculty of Manufacturing Technologies with a seat in Presov, Presov, SK

Abstract

The article presents a promising non-contact face seal of the rotor of a dynamic machine. The principle of pulse balancing of the movable sealing ring is applied in the seal design. The design of the test equipment and seal samples, which were used to conduct comprehensive investigations of the seal in the operating range of speeds and pressures, are considerated. The analysis of the experimentally obtained data of the barrier gas flow rate parameters and pressure changes in the working gap of the seal is carried out. A comparison of the traditional physical model of the working process of leaking pulse seals with the results of the research is performed. Identified and analyzed the fundamental differences of working processes of the traditional leaking and considered non-leaking pulse seals. A model of the physical process is developed and recommendations for the creation of a mathematical model of the gas barrier pulse seal are formulated.

Recommended articles

PLUNGER PRESSING SPEED LIKE THE MAIN FACTOR INFLUENCING OF THE MECHANICAL PROPERTIES OF DIE CASTING

Stefan Gaspar, Jan Pasko
Keywords: die casting | plunger pressing speed | mechanical properties

DESIGN OF CNC MILLING MACHINE AS A BASE OF INDUSTRY 4.0 ENTERPRISE

Martin Sevic, Petr Keller
Keywords: CNC milling machine | smart factory | industry 4.0 | GRBL | Arduino